00,00

Es befinden sich keine Produkte im Warenkorb.

Agricultural Pro package Dimsport New Genius + Trasdata Slave

3.499,00

If you want to start with tractor / agri tuning this is the right pack for you.

-Dimsport New Genius
-Dimsport New Trasdata
-TRACTOR BAG – SET OF WIRINGS AND CONNECTORS K32AGRIALL2
-Activation of agricultural protocols
-Chiptuning configurator for your website (via Iframe)
-Online training
-Technical support

ALL PROTOCOLS INCLUSIVE OF 1 YEAR SUBSCRIPTION.
Produkt Gesamtpreis
Optionen Gesamtpreis
Gesamtpreis

If you want to start with tractor / agri tuning this is the right pack for you.

Of course, it is also possible to add further activation to this package, for example for trucks or cars.

With the chiptuning tools we offer, you can read and write engine control units safely and quickly.
Then send the file to our FTP server. As a rule, you will return the modified file within 45 minutes
In this package you get:

-Dimsport New Genius
-Dimsport New Trasdata
-TRACTOR BAG – SET OF WIRINGS AND CONNECTORS K32AGRIALL2
-Activation of agricultural protocols
-Chiptuning configurator for your website (via Iframe)
-Online training
-Technical support


The Dimsport New Genius:

EASY OBDII REMAPPING

New Genius is the stand alone device for the serial communication with the Engine Control Unit (ECU),through the vehicle OBDII socket or via specific diagnostic connectors. It does not require connections to a personal computers or laptop for the management of the serial communication: it has never been so simple and immediate to achieve programming operations of the vehicle stock ECU.

Intuitive operations to maximize the ease of use: New Genius is a true asset for every tuner thanks to the impossibility to perform wrong operations. Detailed instructions appear on the screen and drive the tuner until the vehicle is programmed.

HIGHEST SAFETY STANDARDS FOR THE MOST EXTENSIVE RELIABILITY DURING WORKING PROCESS:

before programming the vehicle, New Genius verifies the size of the file and the checksum integrity/congruence. In addition, should the programming procedure be interrupted (example: connector unplugged),the device would recover the communication and automatically complete it. Several additional features integrate the conventional operations, like the possibility to reset faulty codes tied to the ECU programming, the reading and automatic writing of the injector settings, counters reset, etc.

In order to meet and fulfil the assorted inquiries presented by professionals, New Genius has been conceived as a flexible device, configured to support from a single, specific application to the most complete range of vehicles provided with engine control units.

DON’T MISS ANY UPDATE!

New developments are constantly released to extend the range of vehicles supported: an improvement achieved thanks to the commitment of several groups of technicians and partnerships.
Subscriptions and upgrades to enhance its technical features are performed through quick online updates.
Not just a black box connecting the vehicle OBDII socket to a computer, but an independent device for serial reading and programming, practical and versatile.

The Dimsport New Trasdata

The New Trasdata is a unique tool supporting all microprocessors utilized by any kind of vehicles, for reading and programming operations in BDM, BOOT, JTAG, NBD, BAM and GPT mode.
When the ECU microprocessor (CPU) is provided by “anti-tuning” feature, a software patch realised by New Trasdata unlocks the OBDII communication, which is therefore restored and supported.

 

The list of microprocessors (CPU) now includes:

  • Freescale/ST MPC56xx SPC56x, Freescale/ST SPC5777C, Freescale SPC577M
  • Infineon Tricore, Infineon Tricore Aurix TC2XX
  • Mitsubishi MH72xx, MH82xx
  • Motorola HC12, MC68xxx, MPC5xx, MPC55xx, 
  • Nec 76F00xx
  • Renesas M32R, SH705x, SH725xx 
  • ST Microelectronics ST10xxx

 

FEW EASY STEPS TO GET TO THE CORE: 

New Trasdata allows the reading and programming of the whole content of the ECU: microprocessor (CPU),flash Eprom and serial Eeprom. A wide variety of operations is therefore supported: after the initial reading, it is always possible to retrieve the original ECU content even in the case of blocking (back-up). This tool also perform autonomous checksum recalculations to ensure normal engine working conditions after the modification. The operations can be performed without any physical soldering/desoldering intervention: a metal positioning frame provided with specific terminal adapters create the connection between the ECU board and the tool. In specific cases, it is possible to perform reading/writing operations without even opening the ECU.

A MUST-HAVE TOOL FOR READING/WRITING BENCH OPERATING.

Specific functions conceived for the tuning field like the mentioned reading of the whole ECU firmware, or the self-identification of the engine maps and important additional parameters (even if located in different components of the ECU),confirm New Trasdata as the leading tool available today on the market for reading and programming bench operations.
One tool – available in both master and slave versions – to support all microprocessors in the automotive field.

All slave devices are bound to the file service of GPT-Consulting.com.

Included in the New Trasdata Set:

NEW TRASDATA READER/PROGRAMMER TOOL (F34NEWTRASDATA)
POWER FEEDING KIT WITH INTERNATIONAL PLUGS (C32GNALIM12)
POWER FEEDING CABLE WITH CLAMPS (F32GN003)
D-SUB15 WIRING KIT FOR BOOT CONNECTIONS (K32GN037-D)
USB CABLE FOR PC/LAPTOP CONNECTION (C32GNUSB01)
FLAT CABLE IDC26-10 (F34NTF01)
FLAT CABLE IDC26-14 (F34NTF02)
FLAT CABLE IDC26-16 (F34NTF03)
FLAT CABLE IDC26-26 (F34NTF04)
FLAT CABLES (2) WITH FREE COLORED WIRES BDM IDC26-10 (F34NTF51)
FLAT CABLES (2) WITH FREE COLORED WIRES JTAG IDC26-16 (F34NTF53)
FLAT CABLES (2) WITH FREE COLORED WIRES IDC26-26 (F34NTF54)
OBDII CONNECTOR FOR NEW TRASDATA (F34NTA14)
FLAT CABLE WITH COLORED WIRES FOR CAN & GPT IDC26-16 (F34NTA15-B)
DB15 ADAPTER-FLAT FOR CAN & GPT (F32GN038)
INSULATED MICRO-CLAMP 0.025″ FOR DIRECT CONNECTIONS TO CPU LEG (C34ACD013)
FLAT CABLE FOR SSM CONNECTIONS (PASSWORD READING) SIMOS18.x/PCR2.1 (F34NTA18-B)
ABS HARD CASE FOR NEW TRASDATA KIT

 

TRACTOR BAG – SET OF WIRINGS AND CONNECTORS K32AGRIALL2 

Seet of wirings and connectors for New Genius, with hard plastic case, for Tractor
reading/programming operations.

Includes:

ABS HARD CASE FOR TRACTOR CONNECTORS (K32GNVALTR)
24V OBDII STANDARD CONNECTOR (F32GN005)
J1939 CNF2B DEUTSCH CONNECTOR TYPE 2 (F32GN032B)
J1939 CNF3 DEUTSCH CONNECTOR TYPE 3 (F32GN033)
J1939 CNF4 DATA LINK STD CONNECTOR (PERKINS/CATERPILLAR) (F32GN034)
DEUTZ/SAME 14 PIN DIAGNOSTIC CONNECTOR K-LINE (F32GN035)
DEUTZ/SAME 14 PIN DIAGNOSTIC CONNECTOR CAN (F32GN064)
DEUTZ/SAME 19 PIN DIAGNOSTIC CONNECTOR (F32GN060)
FENDT 4 PIN DIAGNOSTIC CONNECTOR (K-LINE) (F32GN047)
FENDT 4 PIN DIAGNOSTIC CONNECTOR WITH EXTERNAL POWER FEEDING CAN (F32GN040)
FENDT/MF WIRING EXTENSION FOR ECU PROGRAMMING (F32GN040B)
FENDT 12 PIN DIAGNOSTIC CONNECTOR (F32GN041)
MASSEY FERGUSON 16 PIN DIAGNOSTIC CONNECTOR (F32GN030)
VALTRA 8 PIN DIAGNOSTIC CONNECTOR (F32GN028)
VALTRA 16 PIN DIAGNOSTIC CONNECTOR (F32GN029)

 

All slave devices are bound to the file service of GPT-Consulting.com.

Kategorie: